Using the EM 6000
107
Booster Feed
In this menu item, you can activate the power supply for an external anten-
na amplifier if you are using active remote antennas.
You can find more information about antennas under “Recommenda-
tions for using antennas”.
To open the Booster Feed menu item:
▷ Turn the jog dial in the System menu item until the Booster Feed menu
item appears in the selection frame.
▷ Press the jog dial to open the menu.
The following view is shown on the display.
►
▷ Turn the jog dial to choose between the On and Off options.
►
▷ Press the SAVE button to save your selection.
Switch the power supply for external antenna amplifiers on only if
you are actually using external antenna amplifiers.
If the power supply for external antenna amplifiers is activated, it be-
comes active immediately once the EM 6000 is connected to the
power supply system, regardless of whether the EM 6000 is
switched on or off. See “Connecting/disconnecting the EM 6000 to/from
the power supply system”.
To Next Page
Loading...
