38
12 Technical data
Frequency response 20–18,000 Hz
Input impedance 30 kΩ at 1 kHz
Minimum output impedance 20 Ω
THD 0.01 %
Crosstalk -70 dB
Signal-to-noise ratio ≥ 85 dB
Dimensions approx. 200 x 80 x 20 mm
Weight (without cable) approx. 700 g
Decoding type Dolby™ Pro-Logic™
Processing techniques delay, reverberation, outer ear simulation, comb filtering
Outputs
Headphone mode 2 x 3.5 mm stereo jack sockets
headphone simulates front left, centre and right,
and rear left and right speakers
Speaker mode left, centre, right, surround;
requires 5 active loudspeakers
Room simulations 3 variants
Preamplifier functions volume, balance and bassboost
Supply schedule DSPpro, 6 m cable, 2 adaptor cables, mains unit
To Previous Page
Loading...
