Need help?Do you have a question about the Sennheiser DSP PRO and is the answer not in the manual?
Explains how time and level differences help localize sound sources.
Explains how DSPpro uses directional information to create 3D sound.
Describes Head-Related Transfer Functions and Sennheiser's role.
Indicates the setting of active parameters with LEDs.
Sends a test signal to virtual speakers to check positioning.
Compares virtual surround sound with normal stereo sound.
Explains VOLUME, BASS, and BALANCE controls for sound adjustment.
How to connect the unit to audio sources using RCA plugs.
How to connect the power supply unit to a wall socket.
How to connect stereo headphones to the unit's sockets.
Describes the process of turning the device on.
Explains how to turn the device off and control LED brightness.
Lists default settings for THEATER, BASS, VOLUME, SEAT, AMBIANCE.
Recommends HALL mode, STEREO, and BASS settings for classical music.
Recommends CLUB mode, STEREO, BASS, and AMBIANCE for pop/rock/jazz.
Explains the 15-LED display for parameter settings.
Sends test signals to virtual speakers for positioning checks.
Compares surround sound with normal stereo sound.
Explains VOLUME, BASS, and BALANCE controls for sound adjustment.
Describes how to select virtual seat position (front/back) using SEAT.
Selects source signal (DOLBY, STEREO, MONO) for processing.
Guides on matching DSPpro to individual ear characteristics for realistic 3D sound.
Explains how to save and recall custom ear settings using PRE 1 and PRE 2.
How to switch the unit to loudspeaker mode for external amplifier connection.
Sends test signals to channels for calibration in loudspeaker mode.
Switches the centre channel on/off in loudspeaker mode.
Defines control for stereo balance and its necessity.
Defines a circuit that transmits frequencies within a specific band.
Defines the central audio channel in a cinema or TV setup.
Explains Dolby's noise reduction technology for cassette recorders.
Defines Digital Signal Processing and its role in the unit.
Explains the psychoacoustic phenomenon of sound direction assignment.
Defines Pro-Logic as an active Dolby Surround decoder.
Explains the creation of sound immersion using rear speakers.
General| Brand | Sennheiser |
|---|---|
| Model | DSP PRO |
| Category | Remote Control |
| Language | English |
To Next Page
