Sennheiser EM 2000 - Page 28

Adjustment tips and functions
27
왘 Set the desired frequency bank.
왘 Set the desired channel.
왘 Set the desired frequency.
Changing the settings of the guitar tuner
The following settings are available:
Calling up the “Sync Settings” submenu
To call up the “Sync Settings” submenu (see page 29):
왘 From the extended menu “Advanced Menu”, select “Sync Settings”.
Activating/deactivating the pilot tone evaluation
The transmitter adds an inaudible signal, known as the pilot tone, to the transmitted signal.
The receiver detects and evaluates the pilot tone. The pilot tone supports the receiver’s
squelch function, thus protecting against interference due to RF signals from other devices.
Tune
Guitar Tuner
Sync Settings
Pilot Tone
Warnings
LCD Contrast
Reset
IP-Address
Software Revision
Exit
Advanced Menu
Setting Meaning
“Inactive” The “Guitar Tuner” standard display is deactivated.
“Active” When selecting the “Guitar Tuner” standard display (see page 16),
the receiver is not muted.
“Audio Mute” When selecting the “Guitar Tuner” standard display (see page 16),
the receiver is muted.
Tune
Guitar Tuner
Sync Settings
Pilot Tone
Warnings
LCD Contrast
Reset
IP-Address
Software Revision
Exit
Advanced Menu
Tune
Guitar Tuner
Sync Settings
Pilot Tone
Warnings
LCD Contrast
Reset
IP-Address
Software Revision
Exit
Advanced Menu
Receiver display Meaning
The pilot tone evaluation 햷 is deactivated.
The pilot tone evaluation 햷 is activated.
The pilot tone evaluation 햷 is activated and the receiver
receives a pilot tone from a transmitter.
531.375
SKM300
ew300 G3
B.Ch: 20.24
MUTE
EQ
+ 12dB
MHz
PEAK
-10
040
30
20
10
-20
-40
AF
RF
-30
햷
531.375
SKM300
ew300 G3
B.Ch: 20.24
MUTE
EQ
+ 12dB
MHz
PEAK
-10
040
30
20
10
-20
-40
AF
RF
-30
햷
531.375
SKM300
ew300 G3
B.Ch: 20.24
MUTE
EQ
+ 12dB
MHz
PEAK
-10
040
30
20
10
-20
-40
AF
RF
-30
P
햷