Charging the BA 70 rechargeable battery in the L 70 USB charger
196
Charging the BA 70 rechargeable bat-
tery in the L 70 USB charger
Connecting/disconnecting the charger to/
from the power supply system
To connect the charger to the power supply system:
▷ Use only the NT 5-20 UCW power supply unit from Sennhe-
iser.
▷ Connect the USB-C plug on the charging cable to the USB-
C port on the side of the charger.
▷ Plug the power supply unit with the correct country adapter
into a suitable power outlet.
To disconnect the charger from the power supply system:
▷ Unplug the power supply unit from the wall socket.
▷ Remove the USB-C plug on the charging cable from the
USB-C port on the side of the charger.
To Next Page
Loading...
