Sennheiser Evolution Wireless Digital - Setting Options in the Menu

EW-DX EM 2 rack receiver
107
Setting options in the menu
In the receiver menu, you can configure the following settings.
Changing the name of the radio link
▷ „Ch 1 / Ch 2 -> Name menu item“
Adjusting frequencies
▷ „Ch 1 / Ch 2 -> Frequency menu item“
Adjusting the gain of the wireless link
▷ „Ch 1 / Ch 2 -> Gain menu item“
Setting the output level of the audio signal
▷ „Ch 1 / Ch 2 -> AF Out menu item“
Adjusting the trim of the connected transmitter
▷ „Ch 1 / Ch 2 -> Trim menu item“
Adjusting the low-cut filter
▷ „Ch 1 / Ch 2 -> Low Cut menu item“
Configuring cable emulation for the bodypack transmitter
▷ „Ch 1 / Ch 2 -> Cable Emul. menu item“
Setting the function of the transmitter’s mute switch
▷ „Ch 1 / Ch 2 -> Mute Mode menu item“