Sennheiser Evolution Wireless Digital - Page 90

EW-DX EM 2 rack receiver
89
Outputting audio signals
Each of the two channels on the EW-DX EM 2 has both a bal-
anced XLR-3M output socket and an unbalanced 6.3 mm (1/4")
jack output socket.
▷ Always use only one of the two output sockets for each
channel.
To connect an XLR cable:
▷ Plug the XLR cable into the AF out Balanced socket for the
respective channel on the EW-DX EM 2.