EW-DX EM 2 rack receiver
97
The LED is continuously red:
▷ No link between the transmitter and receiving channel.
The LED is flashing red:
▷ The link between the transmitter and receiving channel is
established.
▷ The battery/rechargeable battery in the paired transmitter
is low.
The LED is flashing blue:
▷ The Bluetooth Low Energy link is being established be-
tween the receiver and a smartphone or tablet with the
EW-D Smart Assist app.
or
▷ The receiving channel is being synchronized with a trans-
mitter.
The LED is continuously blue:
▷ The firmware is being updated.
To Next Page
Loading...
