Need help?Do you have a question about the Sennheiser MK 8 and is the answer not in the manual?
General| Acoustical operating principle | Pressure gradient transducer |
|---|---|
| Connector | XLR-3 |
| Frequency range | 20 Hz - 20 kHz |
| Max SPL | 140 dB |
| Power Requirements | 48 V phantom power |
| Polar pattern | Cardioid |
| Type | Condenser |
| Weight | 500 g |
| Diaphragm | Gold-plated 1" diaphragm |
| Impedance | 50 Ohms |
| Nominal impedance | 50 Ohms |
Safety instructions for connecting the product to power supply units.
Precautions regarding liquids, cleaning agents, and temperature exposure.
Warning about operating switches with tools.
Guide to setting the directivity switch for different pick-up patterns.
Warning about liquids, solvents, and cleaning agents.
Troubleshooting phantom power and connection issues.
Troubleshooting incorrect input connection or activation.
Solutions for clipping due to loud sources or overloaded devices.
Covers switchable pick-up patterns, low-cut/roll-off filter, and attenuation levels.
Specifies phantom power requirements and XLR connector assignment.
To Next Page
