Sennheiser MK 8 - Using the MK 8; Caution: Danger of damage to the device!; Adjusting the pick-up pattern

3
Product overview A
*
1
Soundinletbasket
2
XLR-3socket
3
Low-cut/roll-offswitch
 
4
Directivityswitch
5
Padswitch
–20 dB –10 dB 0 dB
Putting the MK 8 into operation
Informationonmounting,connectingandorientingtheMK8canbe
foundonthecoverpage.
Tosuppressstructure-bornenoise,youcanusetheMKS4
shockmount(seediagramConthecoverpage).
Using the MK 8
Caution Danger of damage to the device!
TheswitchesontheMK8canbedamagedifyoutry
tooperatethemusingtools.
X
OnlyoperatetheswitchesontheMK8usingyour
fingers.
Adjusting the pick-up pattern
X
Setthedirectivityswitch
2
tothedesiredposition:
Pos. Pick-up pattern
Omni-directional
Widecardioid
Cardioid
Super-cardioid
Figure-of-eight
Informationonthesoundinletareasofthedifferentpick-
uppatternscanbefoundindiagramFonthecoverpage.
Diagramscanbefoundonthecoverpages.
*