E - 26
VIDEO SETUP
1. In Stop mode, press the SETUP button.
2. Use the or button to select the Video Setup.
3. Press the button to highlight the TV TYPE.
4. Use the
or button to select the desired TV type.
5. To exit the SETUP MENU and return to the normal screen,
highlight the Exit Setup Mode ( ) and press the ENTER
button.
TV TYPE
Pan Scan
• When wide-screen video is played, this mode clips the right and left sides of the
image so that it can be viewed on a conventional screen.
• Some wide-screen DVDs that do not permit Pan Scan mode playback are
automatically played in letterbox mode (black bands that appear at the top and
bottom of the screen).
Letter Box
• When wide-screen video is played in this mode on a conventional screen, black
bands appear at the top and bottom of the screen.
Wide screen
• This is the correct mode for playing wide-screen videos on the unit or other external
wide-screens.
NOTE
• The displayable picture size is preset on the DVD. Therefore the playback picture
of some DVDs may not conform to the picture size you select.
• When you play DVDs recorded in the 4:3 aspect ratio, the playback picture will
always appears in the 4:3 aspect ratio regardless of the TV TYPE setting.
• If the screen mode is still not correct, press the LCD MODE button repeatedly to
adjust it.
SYSTEM SETUP
1. In Stop mode, press the SETUP button.
2. Use the or button to select the System Setup option.
3. Press the button to highlight the Default.
4. Use the or button to select the desired setup option.
5. To exit the SETUP MENU and return to the normal screen,
highlight the Exit Setup Mode ( ) and press the ENTER
button.
CUSTOMIZING THE DVD FUNCTION SETTINGS
DEFAULT
It takes 3-5 seconds to reset the DVD settings to the factory default.
Pan Scan
Letter Box
Wide-screen
Cut off when a wide-screen
video image is played.
Video Setup
: Select
TV Type Pan Scan
Letter Box
Wide Screen
System Setup
: Select
Default
Yes
No
To Next Page
Loading...