SENSECAP S210X

To Next Page

To Previous Page

12.2 Why is the new sensor’s battery not 100%? ..................................................... 53

12.3 Support............................................................................................................. 53

12.4 Document Version ............................................................................................ 53

Main Page

Table of Contents2
Product Introduction5
Part List6
Key Parameters of the Sensor7
Introduction of Key Parameters7
Get Device EUI, App EUI and Key8
Get the Parameters Via API8
Get the Parameters Via Sensecap Mate App9
LED of Sensor Working Status10
Sensecap Mate App12
Download App12
How to Connect Sensor to App13
Create a New Account13
Connect to Sensor to App14
Configure Parameters through App16
Select the Platform and Frequency16
Set the Interval19
Set the EUI and Key19
Set the Packet Policy20
Set the Activation Type21
Restore Factory Setting22
Connect to the Sensecap Portal23
Sensecap Portal23
Create a New Account23
Other Functions24
API Instruction24
Connect to Sensecap with Helium Network25
Quick Start25
Preparation25
Bind Sensor to Sensecap Portal26
Setup the Sensor28
Set Frequency of Sensor Via Sensecap Mate App29
Check Data on Sensecap Portal30
Connect to Sensecap with Private TTN32
Quick Start32
Preparation32
Bind Sensor to Sensecap Portal33
Setup the Sensor33
Set Frequency of Sensor Via Sensecap Mate App33
Check Data on Sensecap Portal34
Connect to Helium Network35
Register35
Add New Device36
Check the Data on Helium38
Upload Data from Helium to Datacake39
Create a Datacake Account39
Add New Integration on Helium Console39
Configure the Flows on Helium40
Add the Sensor on Datacake42
Check Data from Datacake45
Connect to the Things Network48
Preparation49
Gateway Registration on TTN49
Create the Application49
Add Sensor to TTN Console50
Check Data on TTN Console52
Payload Decoder53
Decoder Code53
Packet Parsing54
Packet Initialization54
Data Parsing Example55
Measurements List55
Example - S2101 Air Temperature and Humidity Sensor56
Example - S2102 Light Intensity Sensor57
Example - S2103 CO2, Temperature and Humidity Sensor58
Example - S2104 Soil Moisture and Temperature Sensor59
Example - S2105 Soil Moisture, Temperature and EC Sensor60
Battery Information61
Device Installation63
Installing Sensor63
Installing the Sensor Bracket63
Mount on Pole and Wall64
Replace the Battery66
How to Buy the Battery66
How to Replace a New Battery67
Trouble Shooting69
Support69
Document Version69

SENSECAP S210X - Page 4

Table of Contents

Related product manuals