IoT into the Wild
44
Example: Set the Node’s data interval is 10 minutes.
Send the downlink command (HEX) via FPort=2:
00 89 00 11 22 0A 00 38 B4
ACK Response:
00 1F 00 11 22 01 00 78 0F
Set Uplink interval = 1 minute
Set Uplink interval = 5 minutes
Set Uplink interval = 10 minutes
Set Uplink interval = 15 minutes
Set Uplink interval = 20 minutes
Set Uplink interval = 30 minutes
Set Uplink interval = 60 minutes
10.2 Reboot the device
FPort = 2
Command: 00C800000000002B26
To Next Page
Loading...
