CRANE BOY INDICATOR LIMITER
OEM version name: INDI BOY
1. GENERAL INFORMATION .................................................................................................................................................................2
1.1. Introduction ..................................................................................................................................................................................2
1.2. Principle .......................................................................................................................................................................................2
2. INSTALLATION AND ADJUSTMENTS ...............................................................................................................................................3
2.1. Specific CRANE-BOY connections .............................................................................................................................................3
2.2. System calibration .......................................................................................................................................................................3
2.2.1. 1° Configuring the display and commissioning the limiter ..................................................................................................4
2.2.2. 2° Configuration of the triggering thresholds (set points) ....................................................................................................5
2.3. Correct operation test ..................................................................................................................................................................6
2.3.1. Verification of safety if one of the transducer wires breaks .................................................................................................6
2.3.2. Overload, slack cable and load verification .........................................................................................................................7
2.3.3. Periodic verification .............................................................................................................................................................7
2.3.4. Peak values registration ......................................................................................................................................................7
3. TROUBLESHOOTING.........................................................................................................................................................................8
4. EQUIPMENT REFERENCE AND OPTIONS ......................................................................................................................................8
5. SPECIFICATIONS ...............................................................................................................................................................................9
This indicator can only be used for lifting if these instructions are carefully read, strictly applied and if
the legislation in force is respected.
To Next Page
Need help?
General
