4
Programmable Electronic Lock
NOTE: Store code and keys in a secure location (other than in the safe).
NOTE: SentrySafe offers a secure online location for the entry and retrieval of your code.
Go to registermysafe.com and register your safe.
Ensure any shipping screws have been removed.
(Located on the inside of the door.)
A
Slide out the battery drawer on the side of the keypad.
B
Insert 4 AAA alkaline batteries (do not use rechargeable
batteries or other types of non-alkaline batteries).
C
Slide battery drawer back into keypad.
NOTE: Do not use rechargeable batteries or any other type of non-alkaline battery. Do not mix
old and new batteries. Do not mix alkaline and other battery types.
Find your code on the back of this owner’s manual.
Remove key and store in a safe place.
WARNING
Test your code several times before putting valuables inside.
Insert key into the lock, turn to the “unlocked” position,
then remove the key.
This is a secondary locking feature, not an override key.
Without the key you will not be able to open your safe.
Preparing your safe for first-time use
Unlocking your safe
1
2
3
1
M100TEST
SN100TEST01*
12345
To Next Page
Loading...
