EasyManuals Logo

SEPTENTRIO PolaRx5 Quick Start Guide

SEPTENTRIO PolaRx5
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
PolaRx
5
To set up the PolaRx5 you will need:
Antenna
WiFi capable device
Antenna cable
USB cable
Power adapter
Quick Start Guide
or
5
. Basic Monitoring
For more information:
The memory stick delivered with the PolaRx5
contains the following documents:
You can also consult our webpage or contact our
Support Department:
Is the PolaRx5 tracking satellites?
Click 'Show table' on the
Spectrum plot then select
GPS L2-P(Y). This frequency
band can be vulnerable to
interference.
Select the 'GNSS' tab then 'Spectrum'
Select the 'GNSS' tab then
'Satellites and Signals'
In open sky, the PolaRx5
should track between 15
and 25 GPS and Glonass
satellites.
The Carrier-to-Noise plot
for GPS should show
about 3 satellites with an
L1CA above 50 dB-Hz
PolaRx5 User Manual
PolaRx5 Firmware Manual
SBF Reference Guide
http://www.septentrio.com
The small GPS L2 signal at
1227.6 MHz should be visible.
Other spikes or anomalous
activity in the spectrum may
indicate interference.
Is there any interference?

Other manuals for SEPTENTRIO PolaRx5

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SEPTENTRIO PolaRx5 and is the answer not in the manual?

SEPTENTRIO PolaRx5 Specifications

General IconGeneral
BrandSEPTENTRIO
ModelPolaRx5
CategoryReceiver
LanguageEnglish

Related product manuals