Sercomm NA502S - Leds

2
LEDs
Front Panel
The Multiple RF Home Gateway has 9 LEDs.
POWER (Green)
 On - Power On/Normal Operation
 Off - Power Off
 Flashing - Rebooting.
WiFi
(Green)
 On - WPS mode is selected.
 On (5 seconds) - WiFi connection is established.
 Off - No WiFi connection available.
 Flashing - Data is being transmitted or received via the Wireless
connection.
Z-Wave
(Green)
 On - Z-Wave mode is selected.
 On (5 seconds) - Z-Wave sensor added or synchronization is
successful.
 Off - Z-Wave module is in idle mode.
 Flashing - Z-Wave module is in active mode.
ZigBee
(Green)
 On - ZigBee mode is selected.
 On (5 seconds) - ZigBee sensor added or synchronization is
successful.
 Off - ZigBee module is in idle mode.
 Flashing - ZigBee module is in active mode.
Bluetooth LE
 On - Bluetooth mode is selected.