4
Physical Details - Wireless HD IP Camera
Front - Wireless HD IP Camera
Figure 2: Front Panel
1. Light Sensor
This is hardware sensor to detect LUX.
2. Lens No physical adjustment is required or possible for the lens, but you
should ensure that the lens cover remain clean. The image quality is
degraded if the lens cover is dirty or smudged.
3. infrared LED
It is used to provide illumination for night time.
4. Microphone The built-in microphone is useful for bi-direction voice
conversation.
Rear - Wireless HD IP Camera
Figure 3: Rear Panel
To Next Page
Loading...
