Sercomm RC8111 - Trigger & Recording Schedule Details; Adding New Schedules

46
Add a new Schedule
Figure 28: Add schedule screen
Name
Enter the name of the schedule.
Schedule
Schedule
Choose the desired option:
 Always
 Schedule
 Never
Trigger Event
Trigger by
 Motion Detection - Movement in a motion detection window
can be used to trigger events.
 Audio Detection - The sound detection can be used to trigger
events.
 HTTP Trigger- If checked, a HTTP CGI command will be
delivered to the HTTP server.
 Periodically - If checked, the events will be triggered at regular
intervals of time.
 Continuously - If checked, the events will be triggered
continuously.
Interval - Select the desired interval from the list.
Actions
 HTTP - If checked, a HTTP CGI command will be delivered to
the HTTP server.
 FTP - If checked, an FTP upload will be activated to the FTP
server. (FTP servers must be configured on the FTP page.)
Attachment Type
 Pre/Post Capture - Select the desired length. The size of the
file depends on this setting, and also the Video size and degree
of compression.