Serpent 977 Viper - Filling; Bleeding

REAR
= LONG
BALLJOINT
11.0mm
Shock
Bag
Nut M2.5
2.5x6x0.5
FRONT
= SHORT
BALLJOINT
10.5mm
STEP
65
STEP
66
STEP
67
STEP
68
FILLING
Fill the shock
body with the
supplied shock
absorber oil.
STEP
69
BLEEDING
Let the oil settle and
allow the air to escape.
Slowly move the piston
up and down to release
any trapped air bubbles.
Repeat as necessary until
no bubbles appear.
STEP
70
26
assemble the spring and springcup
to complete the shock
Check the default set-up sheet
for spring details.