Serpent VIPER 990e - User Manual

Configuration of rear roll center using adjustable inserts.

Step-by-step guide to assembling the rear antiroll bar.

Understanding the active rear toe-in system for dynamic handling.

How to adjust the rear track width for performance tuning.

Adjusting rear camber links and upper pivot for suspension tuning.

Mounting the left and right battery plates to the chassis.

Assembling the transmission gearbox and installing the drive belts.

Installing front drive gears and associated components.

Adjusting front suspension geometry including brackets, caster, camber, and track width.

Assembly and setup of the front anti-roll bar.

Servosaver and Ackermann geometry setup with inserts.

Tuning front camber and track width for optimized performance.

Adjusting the front steering trackrod length for proper alignment.

Mounting the servo and receiver onto the chassis.

Detailed steps for assembling the shock absorbers, including oil and o-rings.

Measuring and setting the final shock absorber lengths.

Installing the front bumper and front shock absorbers.

Mounting the rear body support structure.

Final setup of rear shocks and body mount positioning.

Mounting the electric motor into the chassis.

Installing the drive belt and chassis brace for the drivetrain.

Attaching the Electronic Speed Controller (ESC) to the chassis.

Securing the battery packs for proper weight distribution.

Information on available spare and optional parts for the model.

Overview of specialized tools and branded merchandise.