Server Technology PRO2 - Page 172

PRO2 User Guide
Chapter 8: Using the Command Line Interface (CLI)
• 172
add porttotacacs
Command Syntax
add porttotacacs <port name | id | ALL> <TACACS+ privilege level>
add ptt <port name | id | ALL> <TACACS+ privilege level>
Command Access
Admin level only
add porttouser
Command Syntax
add porttouser <port name | id | ALL> <local user name>
add ptu <port name | id | ALL> <local user name>
Command Access
Admin level only
bstat
Command Syntax
bstat
Command Access
System Monitor access
connect
Command Syntax
connect <target port>
Command Access
Any access level for command; for user level lower than admin, access must be granted to a
port for successful connection.