Server Technology PRO2 - Viewing Network Status

PRO2 User Guide
Chapter 6: Getting Started with the Firmware
• 31
Switched PDU: show network
Network Configuration
State: Static IPv4 Network: Dual IPv6/IPv4
Link: Up Negotiation: Auto
Speed: 100 Mbps Duplex: Full
MAC: 00-0A-9C-60-0029
AutoCfg IPv6: FE80::20A:9CFF:FE60:29/64
IPv4 Address: 10.1.2.65 Subnet Mask: 255.255.0.0
IPv4 Gateway: 10.1.1.1
DNS1: 10.1.5.133
DNS2: 10.1.5.134
Static IPv4/IPv6 Settings
IPv6 Address: ::/64
IPv6 Gateway: ::
IPv4 Address: 10.1.2.65 Subnet Mask: 255.255.0.0
IPv4 Gateway: 10.1.1.1
DNS1: 10.1.5.133
DNS2: 10.1.5.134
DHCP Settings
DHCP: disabled
FQDN: enabled [sentry-600029]
Boot Delay: disabled
Static Fallback: disabled
ZTP <0-Touch>: enabled <not provisioned>
Network Services
FTP Server: enabled Port: 21
FTP Updates: disabled Port: 21
SSH: enabled Port: 22 Auth: Password, Kb-Int
Telnet: enabled Port: 23
HTTP: enabled Port: 80
HTTPS: enabled Port: 443 Installed Cert: Self Generated
User Cert: Disabled Stored Files: None
User Passphrase: (none)
SNMPv1/2: enabled Port: 161 TrapPort: 162
SNMPv3: disabled Port: 161 TrapPort: 162
SPM Access: enabled