Need help?Do you have a question about the Server Technology Switched Rack PDU and is the answer not in the manual?
General| Input Frequency | 50/60 Hz |
|---|---|
| Phase | Single-Phase or Three-Phase |
| Outlet Control | Individual Outlet Control |
| Monitoring | Yes |
| Remote Monitoring | Yes |
| Remote Management | Yes |
| Output Receptacles | IEC C13, IEC C19 |
| Outlet Type | IEC C13, IEC C19 |
| Form Factor | 0U, 1U, 2U |
| Network Interface | Ethernet |
| Protocols | HTTP, HTTPS, SNMP |
| Communication Interface | Ethernet |
| Humidity Range | 5% to 95% non-condensing |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Number of Outlets | 8-48 |
| Operating Temperature | 0°C to 45°C (32°F to 113°F) |
Step-by-step guide for rapid installation and configuration of the Switched PDU.
Essential safety and regulatory information for installing and using the Switched PDU.
Procedure for connecting the external safety ground to the PDU for fault current protection.
Accessing the PDU via the web interface, including login procedures and core navigation.
Managing individual and group outlets, including power states (on, off, reboot).
Setting up SNMP for network monitoring and configuring traps and thresholds for alerts.
To Next Page