PRO2 User Guide
Chapter 7: Using the Web Interface
• 53
The Humidity graph displays a blinking warning or critical error whenever humidity exceeds low or high threshold. The
PRO2 continues to display the status until the condition changes or the issue has been resolved.
•
•
•
•
•
1
The ENV part of the sensor supports two temperature/humidity (T/H) probes as part of the master unit, two
T/H probes as part of the link unit, and the optional EMCU-1-18 (which can support two T/H probes, four
contact-closure monitoring points, and one water sensor). The “No Comm” sensor status is not loss of
communication with the probes themselves.
To Next Page
Loading...