PRO2 User Guide
Appendix B: Regulatory Compliance
• 252
Units have been safety tested and certified to the following standards:
• USA/Canada UL 60950-1:2007 R10.14 and CAN/CSA 22.2 No. 60950-1-07 +A1+A2
• European Union EN 60950-1:2006 + A11 +A1 + A12 + A2
This product is also designed for Norwegian IT power system with phase-to phase voltage 230V.
USA Notification
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at the user’s own expense.
Modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment under FCC
rules.
Canadian Notification
This Class A digital apparatus complies meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe A respecte toutes les exigencies du Règlement sur le matériel brouilleur du Canada.
European Union Notification
Warning: This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may
cause radio interference.
Products with CE Marking comply with the EMC Directive (2014/30/EU), Low Voltage Directive (2014/35/EU) and RoHS 2
Directive (2011/65/EU) issued by the Commission of the European Community.
Compliance with the following harmonized standards demonstrate conformity with the EMC and Low Voltage Directives.
• EN 55032
• EN 55024
• EN 60950-1
To Next Page
Loading...