PRO2 User Guide
Chapter 8: Using the Command Line Interface (CLI)
• 227
Command Syntax
show lines
Command Access
Example
Switched PDU: show lines
ID Line Name
-- ---------
AA1 AA:L1
CA1 CA:L1
DA1 DA:L1
SNMP Email Max Current Current Current Current
ID Notif. Notif. Current Lo-Alrm Lo-Warn Hi-Warn Hi-Alrm
-- ------ ------ ------- ------- ------- ------- -------
AA1 enabled enabled 30A 0.0A 0.0A 21.0A 24.0A
CA1 enabled enabled 30A 0.0A 0.0A 21.0A 24.0A
DA1 enabled enabled 30A 0.0A 0.0A 21.0A 24.0A
Common Line Settings
Line Current Hysteresis: 1.0A
To Next Page
Loading...