Server Technology PRO2 - Page 241

PRO2 User Guide
Chapter 8: Using the Command Line Interface (CLI)
• 241
show waps
Description:
Displays the available wireless access points.
Command Syntax:
show waps
Command Access:
Admin level only; wireless module installed.
show wlan
Description:
Displays the wireless network configurations.
Command Syntax:
show wlan
Command Access:
Admin level only; wireless module installed.
show ztp
Description:
Displays the Zero Touch Provisioning (ZTP) network configurations.
Command Syntax:
show ztp
Command Access:
Admin level only
Example
Switched PDU: show ztp
Zero Touch Provisioning Configuration <DHCP required>
ZTP: enabled <not provisioned>
Auto Updates: disabled
Update Day: Everyday
Update Hour: 12 AM