Server Technology PRO2 - Page 243

PRO2 User Guide
Chapter 8: Using the Command Line Interface (CLI)
• 243
Command Syntax
status <name | id | group | ALL>
Usage Guidelines
Command Access
Example
Switched PDU: status all
ID Outlet Name Control State State Status
-- ----------- ------------- ----- ------
AA1 Master_Outlet_1 Idle On On Normal
AA2 Master_Outlet_2 Idle On On Normal
AA3 Master_Outlet_3 Idle On On Normal
AA4 Master_Outlet_4 Idle On On Normal
AA5 Master_Outlet_5 Idle On On Normal
AA6 Master_Outlet_6 Idle On On Normal
Command Syntax
sysstat
Command Access
Example
Switched PDU: sysstat
Qty Sub-System Status Events
--- ---------- ------ ------
2 Units Normal 0
1 Cords Normal 0
3 Lines Normal 0
3 Phases Normal 0
3 OCPs Normal 0
3 Branches Normal 0
30 Outlets Normal 0
14 Sensors Normal 0
1 UPS Normal 0