SET SET-2010 User Manual

1 of 10
www.smart-e-tech.com
SET-2010
Technical Description
Issue 02 13/04/2022
TECHNICAL DESCRIPTION
SET-2010
32 differential / 64 single ended channel routing card
This document 9040TDD0320 is a technical description of the SET-2010.
Note
Before you begin, complete the Software and Hardware installation procedures
applicable to your application.
Note
The guidelines in this document are specific to the SET-2010. The other
components in the system might not meet the same safety ratings. Refer to the
documentation of each component in the system to determine the safety and
EMC ratings for the entire system.
MORE INFORMATION ON OUR WEBSITE:
www.smart-e-tech.de/slsc

SET SET-2010 Specifications

General

Model	SET-2010
Category	Network Hardware
Ports	8
Speed	10/100 Mbps
Port Type	RJ-45

Summary

SET-2010 Technical Description Overview

Product Introduction and Notes

Overview of the SET-2010 and initial installation notes.

Safety and Electromagnetic Compatibility Guidelines

General Safety Precautions

Guidelines for safe operation and handling of the SET-2010 to prevent hazards.

Electromagnetic Compatibility (EMC) Guidelines

Requirements for maintaining EMC performance and avoiding interference.

SET-2010 Description and Circuitry

Product Description

Details on the SET-2010 routing card's features and capabilities.

Circuitry Overview

Schematic diagrams illustrating the internal signal routing and connections.

Reference Routing Diagrams

Diagrams showing reference signal routing to instrument and fault buses.

Connector Pinout Details

J1 and J2 Front Panel Pinout

Detailed pin assignments for the front panel connectors J1 and J2.

XJ2 Rear Connector Pinout

Detailed pin assignments for the rear connector XJ2.

XJ3 Rear Connector Pinout

Detailed pin assignments for the rear connector XJ3.

Operational Behavior and Specifications

LED Behavior and Error Handling

Explanation of LED indicators and procedures for error handling.

Hardware Specifications

Absolute maximum ratings for hardware parameters.

Technical and Environmental Specifications

Technical data, physical characteristics, and environmental operating conditions.