Sewha SI 300 - Write Command (Time, S;N, Interval)

30
SI 300 Wall mounting / Desk type DIGITAL WEIGHT INDICATOR
Recommended Comm. Interval of WRITE COMMAND is Min. 100ms.
Comm. Interval of WPRT is Min.300ms
You have to guarantee Min. 100ms interval between two different commands.
Response for WPRT will be output through Print Port, set by F32-0.
Time setting
ASCII : STX ID(2Byte) WTIM Time (6byte)ETX
Ex) Time : 12:00:00
SI 300 response
normal: STX ID ACK ETX error: STX ID NAK ETX
Change S/N
ASCII : STX ID(2Byte) WSNO S/N(6byte)ETX
Ex) S/N is changed to 100
SI 300 response
normal: STX ID ACK ETX error: STX ID NAK ETX