Sewha SI 300 - Specification; 3-1 Specification

5
SI 300 Wall mounting / Desk type DIGITAL WEIGHT INDICATOR
3. SPECIFICATION
3-1 Specification
Content
Specification
Performance
External Resolution
1/20,000
Internal Resolution
1/2,097,152 (±1,048,576)
Input Sensitivity
0.1µV/V
Max. Signal Input Voltage
3.0 mV/V
Load cell Excitation
DC +5V
A/D Conversion Method
Sigma-Delta
Decimal Point
0, 0.0, 0.00, 0.000
Drift
Offset
10PPM/℃
Span
10PPM/℃
Linearity
0.001% of Full Scale
Analogue Sampling(sec)
60times / sec
Environment
Operating Temperature Range
-10℃ ~ +40℃ [14℉ ~ 104℉]
Operation Humidity Range
40% ~ 85% RH, Non-condensing
Function
Calibration Mode
Test Weight Calibration Mode
Simulation Calibration Mode
Display
7segment 6 digit, 1 inch
Red Color FND
Key Pad
6EA Key including CAL key
Comm
Serial Interface
Data Transference
Command Mode
Serial Printer Mode
Power
AC100V ~ AC 240V (50/60Hz)
Size
190mm(W)ⅹ124mm(H)ⅹ122mm(D)
Weight : 2.0kg