Pic. 1 Pic. 2 Pic. 3
(5) You can either grab the bobbin thread with your hand or hook it
with a scissor. Seal the bottom bobbin with its cover plate. (You
can also seal it after the bobbin is positioned)
(6) Raise up the presser foot, put the needle thread and bobbin
thread under and behind the presser foot (pic.3)
**IMPORTANT**
Remember to lay down presser foot again and sew some
stitches on the fabric manually by turning Hand-wheel
towards you, before turning on the machine to sew.
7
To Next Page
Loading...