PAGE 13
PAGE 12
OPERATION AND ADJUSTMENT
3. The output pressure of
compressed air can be regulated by
using the regulating valve. turn the
regulation valve knob clockwise to
increase the pressure.
4. When the compressor needs
to be stopped, set the power
switch to the ‘OFF’ position.
OPERATION AND ADJUSTMENT
5. If the compressor should
overheat, the Thermal Overload
will intervene and shut down the
compressor. Should this happen,
switch OFF the machine by
pushing the STOP/START switch
downwards, and wait for at least
5 minutes before pressing the red
RESET button underneath the air
filter and try to start the compres-
sor again.
To Next Page
Loading...
