SHARE AGV - Available Languages; Language Selection

AGV
- 10 -
SHARE headset can work in both mono and stereo mode. Mono mode means only one speaker works and
it can be used to always have one ear free to listen to environmental noises.
To switch between stereo and mono mode, connect the SHARE headset to a PC and use the proper
SHARE wizard software.
Text To Speech Function
12 Available Languages
The 12 available languages are listed below:
• English (British and American)
• French
• Italian
• German
• Spanish (European and Mexican)
• Portuguese
• Chinese
• Russian
• Polish
• Japanese
Language Selection
 Make sure the SHARE headset is in power off state.
 Press and hold # (CTRL Button) for about 8 seconds, until you hear a “PLEASE PAIR PHONE
NOW, ENTER PIN CODE 0000” prompt.
 When the Blue LED and the Red LED alternately flash, release the button; the SHARE headset enters
in pairing state.
 Press and hold the " (PLUS button) and ! (MINUS button) together for more than 1 second, you
will hear a TTS prompt ”PLEASE SELECT LANGUAGE”
 The language selection mode is enabled for 20 seconds; during this time press " (PLUS button) or
! (MINUS button) to select the desired language; for each selected language, the TTS will voice
prompt the language name
 Short press ! (MFB button) or do not press any " (PLUS button) or ! (MINUS button) for 20
seconds and the selected language will be confirmed and stored