SHARE AGV - Operation; Phone Call Management

AGV
- 12 -
Operation
Phone call Operation
Answer incoming call
When there is an incoming phone call, short press ! (MFB button) to manually answer the call.
Automatically answer incoming call
The SHARE headset has an automatic answer function: at the 3
rd
incoming call ring tone (about 8 seconds)
and no reject operations have been completed, the SHARE headset will answer the phone call
automatically. The delay before automatically answering the call can be set by the application Wizard for
PC.
Reject incoming call
Once you hear the ring tone, press and hold the ! (MFB button) for 1 second until you hear a “du” tone;
release the button and the call will be rejected.
Hang up call
In call active state, press and hold the ! (MFB button) for 1 second until you hear a “du” tone to hang up
the call.
Place a call on hold
In call active state, a short press ! (MFB button) to place the call on hold; the caller will hear a tone
while on hold. A new short press of the ! (MFB button) activates the held call.
Audio transfer
In call active state, press and hold the " (PLUS button) and ! (MINUS button) for 1 second and, after
a “du” tone, the call will be transferred from the helmet to the mobile phone. By repeating this operation,
the call will transfer back to the SHARE headset.
Last number redial