sharkclean.eusharkclean.eu
GETTING TO KNOW YOUR SHARK® AI ROBOT
DOCK FRONT
Charging Contacts
DOCK BOTTOM
Charger Cord Wrap
DOCK SETUP
INSTALLING THE SIDE BRUSHES
Snap the 2 included Side Brushes onto the square
pegs on the bottom of the robot.
1.6m
1m
1m
• Select a permanent location for the Charging Dock, because every time you relocate it, your robot will
have to completely re-map your house.
• Place the dock with its back against a wall. Select a level surface on bare floor, in a central area. Do not
place dock against baseboards or heating elements.
• Remove any objects that are closer than 3 feet from either side of the dock, or closer than 5 feet from the
front of the dock.
• Plug charging cord into an outlet. The dock must be plugged in continuously for the robot to find it.
ENGLISH
To Next Page
Loading...
