9sharkclean.co.uk8 sharkclean.co.uk
ASSEMBLY
1. Place motorised Floorhead on floor and insert Wand, pressing it in until it clicks
securely into place�
2. Place Pod onto wand and slide down to connect�
3. Insert Handle into wand, pressing it in until it clicks securely into place�
4. Connect Hose to back of pod, pressing it in until it clicks securely into place�
5. Store included accessories on the Accessory Posts on the pod�
6. Remove Anti-Odour Technology Dial from aluminum can� Flip up the handle, align the teal
arrows, then insert the Anti-Odour Technology Diall into the floorhead�
7. To lock and engage the Anti-Odour Technology Dial, rotate it anticlockwise until it clicks into
the desired odour intensity setting�
More detailed odour assembly instructions and visuals on the following two pages�
IMPORTANT: For proper operation, ensure all connections are securely clicked into place�
ASSEMBLY
(Click)
1
(Click)
2
(Click)
3
(Click)
4
POWER CORD
For cord access, rotate upper hook down
and remove cord�
UPPER CORD HOOK
5
(Turn to
Click)
7
6
To Next Page
Loading...
