Shark AZ913UK Series User Manual

11sharkclean.co.uk10 sharkclean.co.uk
ANTI-ODOUR TECHNOLOGY
ANTI-ODOUR TECHNOLOGY CARTRIDGE REPLACEMENT
ANTI-ODOUR TECHNOLOGY
SETTINGS
Flip up the handle and rotate the Anti-Odour dial to adjust
Anti-Odour Technology intensity or to unlock the dial for
cartridge access�
Flip up the handle and rotate the Anti-Odour
Technology dial clockwise until the two teal arrows
are aligned� Pull the handle to remove the Anti-Odour
Technology Dial from the floorhead�
Rotate the cartridge anticlockwise in the dial
housing and pull out the cartridge to remove it�
Align the yellow arrow on the side of the cartridge with
the yellow arrow on the side of the dial cover, then
insert the cartridge into the dial� Rotate the cartridge
clockwise to lock it in place�
Dispose of old cartridge into the bin� Please do not
throw the anti-odour technology dial into the bin�
For replacement Anti-Odour Technology cartridges please visit sharkclean.co.uk
Remove the new Anti-Odour cartridge from
the can� To maintain the life of the cartridge, keep it in
the can until you are ready to install it�
Align the teal arrow on the dial cover with the teal
arrow on the floorhead� Then reinsert the dial into the
floorhead� Rotate the dial anticlockwise to an intensity
setting to engage� Rotate further to change the
intensity setting to high, medium or low�
ANTI-ODOUR
TECHNOLOGY DIAL
3.REMOVE NEW
CARTRIDGE FROM CAN
5. INSTALL DIAL IN FLOORHEAD
6. USED CARTRIDGE
DISPOSAL
1. REMOVE ODOUR DIAL
FROM FLOORHEAD
Insertion/Removal: Rotate the Anti-Odour Technology dial to align the teal arrows�
Remove the dial to access the odour cartridge for removal or replacement�
High: Rotate the Anti-Odour Technology Dial toward the High position for the highest
level of intensity when the vacuum is in use� This position is the recommended setting
for optimal performance�
Medium: Rotate the Anti-Odour Technology Dial toward the medium position to
decrease the intensity of the odour when the vacuum is in use�
Low: Rotate the Anti-Odour Technology Dial toward the Low position to minimise the
intensity to the lowest level when the vacuum is in use�
ANTI-ODOUR TECHNOLOGY TIPS
NOTES: • The odour dial needs to be installed for the vacuum to function properly, with or without the odour cartridge�
• Wash hands thoroughly after handling� If irritation or rash develops, seek medical advice/attention�
• Odour cartridges should be replaced every 6 months for optimal Anti-Odour Technology performance�
The Anti-Odour Technology Dial Must be Installed for Vacuum to Function Properly
• Remove the anti-odour cartridge from dial if you don’t want the benefits of the Anti-Odour
Technology�
Maintenance Required
• Clean all filters as recommended under Cleaning Filters�
• Empty your dust cup before storing your vacuum�
• Replace the cartridge as recommended under Anti-Odour Technology Cartridge Replacement�
• Visit sharkclean�co�uk to learn more and purchase replacements�
Fragrance Strength Over Time
• The intensity of the Anti-Odour Technology’s fragrance may diminish over time� It may also
have no noticeable fragrance at all� This is natural and does not indicate the technology isn’t
working� Follow replacement instructions to ensure continued performance�
Shark's Anti-Odour Technology
cartridge guards against bad odours
inside your vacuum�
4. INSTALL NEW
CARTRIDGE IN DIAL
TURN UNTIL
CLICK TO LOCK
2. REMOVE OLD ODOUR
CARTRIDGE

Shark AZ913UK Series Specifications

General

Brand	Shark
Model	AZ913UK Series
Category	Vacuum Cleaner
Language	English