EasyManuals Logo

Shark IQ ROBOT 1000AE Series User Manual

Shark IQ ROBOT 1000AE Series
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
sharkclean.comsharkclean.com
MAINTENANCE
EMPTYING THE ROBOT DUST BIN
Press the Dust Bin Release Tabs and slide out the
dust bin.
CAUTION: Turn o power before performing any maintenance.
To avoid spills, be sure to hold the dust bin in an
upright position. Pinch and lift to open the lid.
Empty debris and dust into trash. Look between the filter and plastic shield and make
sure there is no debris buildup.
Remove and clean any debris buildup as needed
with a dry cloth or soft brush.
USING THE SHARK IQ ROBO
Get the most out of your Shark iQ Robot® with these app features:
Interactive Map
Your robot knows where it is
in your home. Identify rooms
for Room Select.
Room Select
Immediately send your robot
directly to any room on that
floor.
Recharge and Resume
Use Recharge and Resume
to help ensure complete,
multi-room coverage in your
home.
Scheduling
Set whole-home cleanings
for any time, any day.
Control From Anywhere
Wherever you are, you’re in
control of your robot.
Cleaning Reports
Each time your robot cleans,
your app will generate a
cleaning report.
Volume Control
You can adjust the volume
level of your robot's audio
notifications.
Search for SharkClean in the app store and download the app to your iPhone
TM
or Android
TM
.
ERROR CODE PROBLEM
! (RED) + Wi-Fi indicator (RED Flashing) Wrong password for Wi-Fi
! (Flashing red) + Wi-Fi (RED) SSID cannot be found, try connecting again
! + Wi-Fi (Flashing RED alternately) Wrong user name or password for your Shark account
! + Wi-Fi (Flashing RED at the same time) Cannot connect to Wi-Fi
USING THE SHARKCLEAN® APP AND VOICE CONTROLS
SETTING UP VOICE CONTROL WITH THE GOOGLE ASSISTANT OR AMAZON ALEXA
Visit sharkclean.com/app for setup instructions which include how to enable Shark Skill for Amazon Alexa
and using with Google Assistant.
Google Assistant:
“OK Google, tell Shark to start cleaning.”
“OK Google, tell Shark to pause my robot.”
OK Google, tell Shark to send my robot to
the dock.”
Amazon Alexa:
Alexa, tell Shark to start cleaning.”
Alexa, tell Shark to pause my robot.”
Alexa, tell Shark to send my robot to
the dock.”
Please visit sharkclean.com/app or call 1-888-228-5531 for answers to all your app questions.
Kitchen
Living Room
Dining Room
o
m
WI-FI TROUBLESHOOTING
To use the app, your phone must be connected to
a 2.4GHz network. The app will only work on a
2.4GHz network.
Typical home Wi-Fi networks support both 2.4GHz
and 5GHz.
Do not use a VPN or a proxy server.
Make sure Wi-Fi isolation is turned o on the
router.
If you cannot connect, call 1-888-228-5531.
STILL CAN'T CONNECT?
Restart your phone
Turn o phone, wait a few minutes, then turn it
back on and connect to Wi-Fi.
Reboot your robot
Make sure the power switch on the back of the
BASE is in the ON position.
Press the power switch on the side of the ROBOT
to the OFF position. Wait 10 seconds, then press it
again to turn power back ON.
Reboot your router
Unplug the router power cable for 30 seconds,
then plug it back in. Allow several minutes for your
router to reboot completely.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Shark IQ ROBOT 1000AE Series and is the answer not in the manual?

Shark IQ ROBOT 1000AE Series Specifications

General IconGeneral
BrandShark
ModelIQ ROBOT 1000AE Series
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals