4
TOLL FREE: 1-800-798-7398
ATTACHING THE MICRO-FIBER PAD
1 Place the micro-fiber cleaning pad
on the floor with the quick fastener
strips facing up. Place the Light &
Easy™ Steam Mop on the top of the
pad to attach. (fig. 1)
IMPORTANT: Only add water to the
tank. Chemicals or cleaning solutions
may be unsafe or cause damage.
IMPORTANT: Please wait 3-5 minutes
for your Light & Easy™ Steam Mop to
cool off before removing the micro-
fiber pad.
Getting Started
Replacement micro-fiber pads are
available at www.sharkclean.com or
by calling 1-800-798-7398.
Your micro-fiber cleaning pads
should be replaced every 3
months to maximize cleaning
performance.
fig. 1
S3251_11_ENG_IB_101117.indd 4 10-11-17 1:58 PM
To Next Page
Loading...
Need help?
General
