sharkclean.comsharkclean.com
ASSEMBLY ASSEMBLY
1. Insert the Wand into the Pod.
2. Insert the Handle into the top of the wand.
3. Connect the Hose to the back of the pod.
4. Insert the C-clip into the back of the pod.
5. Insert the hose into the C-clip and the hose holder.
6. Store Accessories on the Tool Storage Posts.
For proper operation, ensure all parts are firmly clicked into place.
(Click)
1
(Click)
2
(Click)
3
6
Tool Storage Posts
Upper Cord Hook
Cord Clip
POWER CORD
For cord access, rotate upper hook down
and remove cord.
Use cord clip located on the side of wand to
hold cord in place while vacuuming.
UPPER CORD HOOK CORD CLIP
(Click)
4
(Click)
5