sharkclean.comsharkclean.com
ASSEMBLY ASSEMBLY
POWER CORD
For cord access, rotate upper hook down
and remove cord.
Use cord holder on the side of wand to hold
cord in place while vacuuming.
UPPER CORD HOOK CORD HOLDER
1
(Click)
2
(Click)
1. Insert the Wand into the Pod.
2. Insert the Handle into the top of the wand.
3. Connect the Hose to the back of the pod.
4. Insert the C-clip into the back of the pod.
5. Insert the Hose into Hose Holder.
6. Store Accessories on the Tool Storage Posts.
For proper operation, ensure all parts are firmly clicked into place.
3
(Click)
4
(Click)
5(Click)
6
To Next Page
Loading...
