The Shark
®
Rocket
®
Powerhead has a 2-speed POWER slider switch on the handle.
The Motorized Floor Nozzle is equipped with headlights that illuminate the floor surface being cleaned. The lights turn on in either speed setting.
Less Suction
opened
More Suction
closed
SUCTION RELEASE
This unit has a Suction Control Button to help
with push and pull on high-pile carpets and to
release suction when vacuuming area rugs� Open
to minimize suction� Be sure to close again for
maximum suction�
LO HI
Brushroll spins quickly
5
www.sharkninjamanuals.com
USAGE
• LO - Gentle on hard floors and area rugs
• HI - Deep-cleans carpets by removing embedded dirt
NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets)
please set to HI with the SUCTION CONTROL closed�
1 Plug the unit into an electrical outlet�
2 Slide the POWER switch to the LO position to gently clean hard
floors and area rugs� The Brushroll will spin slowly�
3 Slide the POWER switch to the HI position to deep-clean carpets by
removing embedded dirt� The Brushroll will spin quickly�
NOTE: Before vacuuming your delicate area rugs or carpets, refer to the
manufacturer’s recommended cleaning instructions�
Deep Clean Carpet Brushroll
• LO - For large and heavy debris pickup
• HI - For loose and stuck-on dust and debris
1 Plug the unit into an electrical outlet�
2 Slide the POWER switch to the LO position to clean large
and heavy debris� The Brushroll will spin slowly�
3 Slide the POWER switch to the HI position to clean loose and
stuck-on dust and debris� The Brushroll will spin quickly�
NOTE: The brushroll will not spin unless the Telescoping Wand
isreclined�
Gentle Touch Hard Floor Brushroll
Brushroll spins slowly
To Next Page
Loading...
Need help?
General
