1 To adjust the height of the Telescoping Wand, unwrap power cord, press on
the HEIGHT ADJUST button, and pull up to increase height, or push down to
decrease height�
2 Stand the vacuum upright� Step on the Motorized Floor Nozzle and pull the
Telescoping Wand back to start vacuuming�
VACUUMING
STORAGE
1 To store the vacuum, press on the HEIGHT
ADJUST button and press down to decrease
the height of the Telescoping Wand�
2 Wrap the power cord around the cord hooks�
STEP 1 STEP 2
OR
6
1-800-798-7398
English