USING YOUR VACUUM STORAGE
TIP: For quick cord access,
rotate upper hook down
and remove cord. Rotate
back up for cord storage.
1 To adjust the height of the
telescoping wand, unwrap
power cord, press Height
Adjust button, and pull
wand up to increase its
height or push down to
decrease its height.
2 Plug power cord into
electrical outlet. Step on
floor nozzle and pull wand
back. Select appropriate
vacuum setting and start
cleaning. Please note,
the brushroll will not
spin unless the wand
isreclined.
1 To store the vacuum, press Height Adjust
button and push down on telescoping
wand to decrease its height.
2 Wrap power cord around cord hooks.
OR
WHAT DOES THE
BRUSHROLL INDICATOR
LIGHT MEAN?
Solid Green
The brushroll is on and
working as it should.
Solid Red
There is a jam in the brushroll
area. Turn your vacuum off
and remove the blockage.
Flashing Red*
The floor nozzle is overheating.
Turn your vacuum off and wait
for it to cool down.
* See Troubleshooting section for
further instructions.
STEP 1 STEP 2
To Next Page
Loading...
Need help?
General
