Shark Rocket AH454Q

15 16
1-800-798-7398 sharkclean.com
MAINTENANCE
WARNING: Hand
wash fliters with
water only to prevent
damage from
cleaning chemicals�
Allow ALL filters
to dry completely
before replacing
in the vacuum to
prevent liquid from
being drawn into
electric parts�
RECOMMENDED
FILTER CLEANING
SCHEDULE:
Pre-Motor Filter Kit
(Foam & Felt)
XFFH400
Clean once a month.
Post-Motor Filter
XEXFH400
Clean once a year.
FILTER ACCESS
CLEANING THE FILTERS
Pre-Motor Filters
Access the pre-motor filters by pressing the FILTER ACCESS
latch on the top of the dust cup. Remove and rinse the foam
and felt filters with water. Tap loose dirt off filters between
washes as needed. Once completely dry, insert the felt filter
first, then place the foam filter on topof it.
Filter Access Latch
Foam
Felt
Post-Motor Filter
Access the post-motor filter on top of the floor nozzle. Remove and rinse with water.