WARNING: To reduce
the risk of shock and
unintended operation,
turn power off and
unplug unit before
servicing�
NOTE: Clean the dust
screen inside the dust cup
as required.
NOTE: The unit will only
run when the dust cup is
locked into place.
NOTE: Empty dust cup
when debris reaches the
MAX fill line.
MAINTENANCE
EMPTYING THE DUST CUP
1 Detach the removable dust cup from the floor nozzle by
pressing the dust cup release pedal located on the left side
near the nozzle.
2 Once the dust cup pops up, hold it by the
handle and lift up to remove it from the
floornozzle.
3 Hold the dust cup over a trash bin and
press the EMPTY button. The bottom lid
willopen, allowing the debris to fall out.
STEP 1 STEP 2 STEP 3
To Next Page
Loading...
Need help?
General
