17 18sharkclean.com sharkclean.com
ENGLISH
MAINTAINING YOUR VACUUM - Continued
CHECKING FOR BLOCKAGES:
HANDHELD AND WAND
1 Remove the wand from the
handheld vacuum and check
all dust cup intake openings.
2 Remove the floor nozzle from
the wand and check the wand
for blockages.
TIP: Ensure the bottom of the floor
nozzle is completely sealed and locked
before using.
TIP: You do not need any tools to open
the floor nozzle, just a coin.
BOTTOM OF FLOOR NOZZLE
1 Use the edge of a coin to open the
three locks on the bottom of the
floor nozzle.
2 To access the brushroll, remove
the cover from the bottom of the
floor nozzle. Shine a flashlight into
the nozzle to check for possible
blockages in the airway.
3 Run scissors along the groove in
the brushroll to cut or clear away
any string, carpet fibers, hair, or
other debris.
4 To reinstall the cover, line it up,
then rotate down until it clicks into
place. Use the edge of a coin to
close the three locks on the bottom
of the nozzle.
To Next Page
Loading...
