ENGLISH
13 14sharkclean.com sharkclean.com
STORAGE
USING THE DUST-AWAY®
HARD FLOOR ATTACHMENT
IMPORTANT: DO NOT use the
Dust-Away Hard Floor Attachment
without the microfiber pad.
MICROFIBER PAD CARE
Machine-wash or hand-wash the pad
separately in warm water with
liquid detergent.
DO NOT use bleach or fabric softeners
as they may damage the pad or
leave a coating that will reduce its
cleaning performance.
Tumble dry low or line-dry to extend
the life of the microfiberfabric.
For the best results, replace the
microfiber pad every 3 to 4 months.
STEP 1
STEP 2
Slip two tabs between the nozzle and
the duster base and attach them to the
front fasteners.
Pull the other two tabs tightly around
to the back fasteners. Ensure the pad
is flat against the bottom surface and
tightly secured.
Slide the power switch to setting I, Bare
Floor, Small Area Rugs to clean hard
floors. Do not use to clean damp floors
or wet/sticky messes. Use only pads
provided by Shark®.
Note: Ensure there is slack where the cord connects to the handheld vacuum.
Press the Wand Release button on the top of the wand to release the handheld
vacuum. Align the catch on the bottom of the handheld vacuum with the storage
hook on the wand. Slide the handheld vacuum down so that the catch hangs from
the storage hook. Wrap the cord counterclockwise around the cord hooks, starting
with the top hook.
Handheld
Vacuum Catch
Handheld Vacuum
Storage Hook
To Next Page
Loading...
Need help?
General
